79
Chapter 6
W
elding Condition
S
ETTING
W
ELDING
C
ONDITIONS
W
ELDING
C
ONDITION
C
HAPTER
6
6.6.5
Arc spot time
This section explains the details of arc spot and torch switch operation.
Selecting "ARC SPOT" by the CRATER-FILL menu allows the machine in the main mode.
•
In this mode, the torch switch remains to be ON for welding operation. When the arc spot time elapses, the welding
automatically stops.
•
The arc spot time is displayed on the left digital meter when pressing the SPOT TIME menu, and is adjustable by the
parameter adjustment knob.
•
Turning OFF the torch switch before reaching the arc spot time starts the anti-stick treatment from then.
T I P S
• In carrying out the arc spot welding, purchase the nozzle especially for arc spot (optionally available).
For details on the nozzle for arc spot, see the instruction manual of the torch.
Pre-flow time
Anti-stick time
ON
OFF
Arc spot time
Torch switch
Gas flow
Output voltage
Wire feeding speed
Welding current
Pre-flow
Post-flow
No-load voltage
Slow-down speed
Welding current
ON
OFF
