81
Chapter 6
W
elding Condition
S
ETTING
W
ELDING
C
ONDITIONS
W
ELDING
C
ONDITION
C
HAPTER
6
6.6.8
Penetration control adjustment
This section explains how to adjust the penetration control. Using the constant penetration function enables to
automatically adjust the wire feed speed so that the constant welding current can be assured even when the wire feeding
length changes.
Press the CONSTANT PENETRATION key. When the LED of the key is ON, it means the penetration control is ON.
This results in reduction of changes in penetration depth and bead width of the base material. Especially for welding
where you desire to make penetration depth constant, use the welding power source with this penetration control function
enabled.
T I P S
• The penetration control function is available when "MILD STEEL SOLID", "MILD STEEL CORED",
"STAINLESS STEEL SOLID" or "STAINLESS STEEL CORED" is selected by the WIRE MATERIALS menu.
• The penetration control functions only during the production weld while it does not during the initial
and crater processes. Also, the function cannot be used in arc spot.
6.6.9
Welding guide
By setting the “WELD JOINT” and “PLATE THICKNESS”, the welding current will be set automatically according to each
parameter.
1.
Select "WELDING GUIDE" on the HOME screen.
2.
Turn the screen operation knob and select "WELD JOINT", then press the screen operation knob.
●
Turn the screen operation knob and point the cursor to
WELDING GUIDE, then press the screen operation knob.
⇒
WELDING GUIDE screen is displayed.
⇒
The color of the selected parameter will be inverted on the
display.
0,/'67((/
ȭ
67$1'$5'
&5$7(5),//21
,1,7,$/&21',7,21
ࠉࠉ
:(/',1**8,'(
2))
21
6<1
,1',9
0(18
6(/(&7
(17(5
:(/',1**8,'(
:(/'-2,17
㸸7-2,17
LQFK
+20(
6(/(&7
(17(5
