103
Chapter 6
W
elding Condition
S
ETTING
I
NTERNAL
F
UNCTIONS
W
ELDING
C
ONDITION
C
HAPTER
6
6.7.2.54 F86/F87: Current display adjustment (GAIN/OFFSET)
Set the adjustment value (gain/offset) when the current display value on the left digital meter is different from the actual
current value.
The current value displayed on the digital meter is obtained by software processing of the average value of outputs;
therefore, it may not be consistent with the value indicated on a needle meter, etc. When this happens, using this function
enables to finely adjust the current display value.
•
For F86, set gain, and for F87, set offset.
Changing the set value only corrects the display; the output welding current does not change.
•
For more information on the adjustment procedure, contact dealer.
NOTE
• Do not carelessly change the setting of this function.
6.7.2.55 F88/F89: Voltage display adjustment (GAIN/OFFSET)
Set the adjustment value (gain/offset) when the voltage display value on the right digital meter is different from the actual
voltage value.
The voltage value displayed on the digital meter is obtained by software processing of the average value of outputs;
therefore, it may not be consistent with the value indicated on a needle meter, etc. When this happens, using this function
enables to finely adjust the voltage display value.
•
For F88, set gain, and for F89, set offset.
Changing the set value only corrects the display; the output welding voltage does not change.
•
For more information on the adjustment procedure, contact dealer.
NOTE
• Do not carelessly change the setting of this function.
