![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-20msp/jlg-20msp_service-and-maintenance-manual_1655764078.webp)
SECTION 4 - CONTROL COMPONENTS
31215825
4-13
Entering Password
Programming Mode Selection
Selecting Programmable Item to Adjust
Adjusting Programmable Setting
Note:
To exit Programming Mode after entering programmable
settings, power machine off with either the Main Power
Selector Switch or Emergency Stop Button.
1.
The Brake Release button (1) moves the box (around
digit) from left to right to select which digit to change.
2.
Platform UP button (2) increases the numerical digit.
3.
Platform DOWN button (3) decreases the numerical digit.
4.
Change all five digits (4) to match password level, then
press the Brake Release button (1) again.
1.
Use Platform UP/DOWN buttons (1) to move the selec
-
tion box (2) up or down to select item to program.
2.
Press the Brake Release button (3) to enter selected mode
then move on to Selecting Programmable Item to Adjust.
1
2
3
00000
4
1
2
3
1.
Use the Platform UP/DOWN buttons (1) to scroll through
the list of programmable items available to your pro
-
gramming level.
2.
Once a programmable item to be adjusted is selected,
press the Brake Release button (2) to enter that settings
adjustment mode.
1.
Adjust the programmable setting using the Platform UP/
DOWN buttons (1), see Table 4-1 for range of settings for
the item selected.
2.
Once parameter is set for the programmable item, press
the Brake Release button (2), this will enter the parameter
and return you to the Programmable Settings Menu.
1
2
1
2
Figure 4-21. Entering Password
Figure 4-22. Programming Mode Selection
Figure 4-23. Selecting Programmable Item to Adjust
Figure 4-24. Adjusting Programmable Setting
Go
to
Discount-Equipment.com
to
order
your
parts