![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-20msp/jlg-20msp_service-and-maintenance-manual_1655764082.webp)
SECTION 4 - CONTROL COMPONENTS
31215825
4-17
4.7 PLATFORM CONTROL CONSOLE - SERVICE
PROCEDURES
General
DO NOT ATTEMPT TO DISASSEMBLE THE PLATFORM CON
-
TROL BOX IF MACHINE IS STILL UNDER WARRANTY. OPEN
-
ING THE PLATFORM CONTROL BOX WHILE THE MACHINE
IS UNDER WARRANTY WILL VOID THE WARRANTY. IF
UNDER WARRANTY REQUEST A REPLACEMENT BOX FROM
THE FACTORY.
The platform control console allows for replacement of nine
components.
• Emergency Stop Switch
• Key Switch
• Joystick Assembly
• Display/Controller Module
• Drive/Lift Mode Selector Switch
• Horn Button Switch
• Rear Cover
• Wiring Harness Connector Socket
• Mounting Bracket
Remove Platform Control Console
First remove the platform control console completely from the
platform assembly. See Section 4.3, Control Components -
Installation.
Figure 4-25. Platform Control Console Components
1.
E-Stop/Shut Down Switch
5.
Drive/Lift Mode Selector Switch
2.
ON/OFF Key Switch (a)
6.
Horn Button Switch
3.
Joystick Assembly
7.
Rear Cover
4.
Display/Controller Module
8.
Wiring Harness Connector
Note:
(a) No key switch on Australian spec. machines.
Go
to
Discount-Equipment.com
to
order
your
parts