SECTION 3 - BASE COMPONENTS
3-12
31215825
Hub Disassembly
Figure 3-12. Hub Disassembly
1.
Remove Main Wheel Bearing (G14).
NOTE:
This part is held in the hub with a press fit. To remove have
the hub setting seal side up. Use a plate or rod with a large
enough diameter push in the inner race of the bearing.
Apply force to the push the bearing out. This bearing will
need to be replaced upon reassembly.
2.
Remove main Lip Seal (G16).
NOTE:
This Lip Seal (G16) is also held in with a press fit. Remove
the Lip Seal only if the hub or seal needs to be replaced. The
Lip Seal will most likely become damaged during removal.
Try not to damage the hub bore.
Go to
Discount-Equipment.com
to
order your
parts
