![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-20msp/jlg-20msp_service-and-maintenance-manual_1655764103.webp)
SECTION 5 - MAST COMPONENTS
5-8
31215825
Tool Use - In-Line Style Fittings (continued)
Tool Use - Angled Style Fittings
Step 4.
Gently push hose assembly into cou
-
pling body (see directional arrow).
Step 5.
Maintaining slight pressure on the hose
assembly, actuate the tool (see arrow).
Step 6.
Release the tool and pull on hose assem
-
bly to complete disconnection.
Step 1.
Prior to disconnection, ensure that sys
-
tem is not under pressure.
Step 2.
Pull on hose assembly to create a gap
between the dust boot and hose fitting
shoulder.
Step 3.
Insert the disconnect tool in the gap cre
-
ated between the dust boot and hose fit
-
ting shoulder.
Go
to
Discount-Equipment.com
to
order
your
parts