SECTION 1 - SPECIFICATIONS
1-8
3121171
NOTE:
After S/N 0300134389 machines may be built with either
Bonfiglioli or Reggiana Riduttori wheel drive hubs.
4.
A. Wheel Drive Hub - Rexroth (Prior to S/N 100128)
Lube Point(s) - Level/Fill Plug
Capacity - 0.5 L (1/2 full)
Lube - EPGL
Interval - Change after first 150 hours then every 1200
hours of operation
Comments - Place Fill port at 12 o’clock position and
Check port at 3 o’clock position. Pour lubricant into
fill port until it just starts to flow out of check port.
B: Wheel Drive Hub - Bonfiglioli (S/N 100128 to Present)
Lube Point(s) - Level/Fill Plug
Capacity - 2.1 qt (2 L) ± 10%
Lube - EPGL
Interval - Change after first 150 hours then every1200
hours of operation
Comments - Place Fill port at 12 o’clock position and
Check port at 8 o’clock position. Pour lubricant into
fill port until it just starts to flow out of check port.
C: Wheel Drive Hub - Reggiana Riduttori (S/N 134389 to
Present)
Lube Point(s) - Level/Fill Plug
Capacity - 0.5 qt (0.5 L) ± 10%
Lube - EPGL
Interval - Change after first 150 hours then every 1200
hours of operation
Comments - Place Fill port at 12 o’clock position and
Check port at 3 o’clock position. Pour lubricant into
fill port until it just starts to flow out of check port.
5.
Hydraulic Return Filter -
(See Figure 1-3. and Figure 1-4.)
Lube Point(s) - Replaceable Element
Interval - Change after first 50 hours and every 300
hours thereafter or as indicated by condition indicator.
Go
to
Discount-Equipment.com
to
order
your
parts
