SECTION 3 - CHASSIS & TURNTABLE
3121171
3-63
13.
Fit bearings on 3rd stage planetary gears and using a
spacer mounting mount everything on the spindle pins.
Lock with an outer snap ring. Lubricate bearings.
14.
Using a marking pen, make a mark between the snap
ring and the bearing. Fit the greased spring and the
release joint. Use grease to fit the O-Ring 2-275 in the
hub support seat.
15.
Place hub on support making the two holes coincide for
tightening the M10x25 flathead socket screws at the
torque of 5daNm.
16.
Fit the reduction gears and the pinion in the unit.
Go
to
Discount-Equipment.com
to
order
your
parts
