SECTION 3 - CHASSIS & TURNTABLE
3121171
3-95
2.
The Torqlink™ inner housing bearing/bushing (13) can
now be pressed into its counterbore in housing (18)
flush to 0.03 inch (.76 mm) below housing wear plate
contact face. Use opposite end of bearing mandrel used
to press in outer bearing/bushing (19).
3.
Press a
new
dirt and water seal (20) into the housing (18)
outer bearing counterbore.
The Torqlink™ dirt and water seal (20) must be pressed in until
its’ flange is flush against the housing.
Go to
Discount-Equipment.com
to
order your
parts
