SECTION 3 - CHASSIS & TURNTABLE
3-60
3121171
12.
Disassemble the Ø160 inner snap ring and pull the
spring holder spacer out. Remove springs. Using a com-
pressed air jet in the brake control hole, pull piston out
of the spindle.
13.
Remove brake discs and seals.
14.
Fit ball bearing into input shaft and lock it with a Ø40
outer snap ring. Install motor shaft in spindle and lock
with a BR68 ring. Lubricate bearing.
Assembly
1.
Make sure all wheel gear components are devoid of
burrs, machining residues, and are correctly washed.
2.
Fit ball bearing in input shaft. Lock with a Ø40 outer
snap ring.
3.
Install motor shaft in spindle and lock with BR68 ring.
Lubricate bearing.
Go to
Discount-Equipment.com
to
order your
parts