SECTION 3 - CHASSIS & TURNTABLE
3121171
3-99
17.
Assemble commutator ring (6) over alignment studs
onto the manifold.
18.
Assemble a
new
seal ring (3) flat side up, into commuta-
tor (5) and assemble commutator over the end of drive
link (10) onto manifold (7) with seal ring side up.
19.
If shuttle valve components items #21, were removed
from the end cover (2) turn a plug (21), loosely into one
end of the valve cavity in the end cover. A 3/16 inch
Allen wrench is required.
20.
Assemble a
new
seal ring (4) into end cover (2) and
assemble end cover over the alignment studs and onto
the commutator set. If end cover has only 5 bolt holes
make sure cover holes are aligned with the 5 threaded
holes in housing (18). The correct 5 bolt end cover bolt
hole relationship to housing port bosses.
NOTE:
If end cover has a valve (24) or has five bolt holes, use the
line you previously scribed on the cover to radially align the
end cover into its original position.
Go to
Discount-Equipment.com
to
order your
parts