SECTION 3 - CHASSIS & TURNTABLE
3-38
3121171
9.
Using a press and a metallic stopper, push gearbox
housing (23) against shoulder on flanged hub (31) until
assembling of unit is complete.
SCREW NUT (22) PARTIALLY IN TO PREVENT FLANGED HUB (31) FROM COM-
ING OUT OF GEARBOX HOUSING (23) DURING THE FOLLOWING STEPS.
10.
Use a hoist to place the torque multiplier (ATZ.09.016.0)
on the ring nut (22).
11.
Using multiplier (ATZ.09.016.0), tighten ring nut (22),
using a torque wrench with an input multiplier torque of
71 ± 3 ft-lb (96,5 ± 4, 5 Nm) corresponding to an output
multiplier torque of 3688 ± 184 ft-lb (5000 ± 250 Nm).
12.
Stake ring nut (22) near two seats at 180° of flanged hub
(31) on the right side.
NOTE:
Stake Ø 4+5 mm (depth 1+1,5 mm).
Go
to
Discount-Equipment.com
to
order
your
parts