OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 71
Using [Program], adjust frame rate and quality configure recording
program for Continuous&Event, Manual&Event, and
Schedule&Event..
Select Program to configure frame rate & resolution. For
maximum performance, user can freely allocate the recording
resource per channel. This feature enables the user to lower the
recording performance of each channels and allocate the
remaining resources to raise the recording performance of a
specific channel or channels.
<Note>
1)
For maximum recording, user should allocate recording resource only to the half of the DVR’s channels.
2) To double the recording performance, user should set recording frame as 0 in all even or odd channels.
Program
There are 9 programs from A to I composing recording quality and resolution per channel.
CH (Channel)
Display the channel No.
Input Res.
It shows resolution per camera connected to each channel.
Rec. Res
It shows resolution for each recording channel.
The DVR will automatically record in 720p or 1080p determined by the video input.
F (FPS)
FPS (frames per second) users can select 1 to 30fps per second. Max. Frame can be changed according to
the configuration.
Q (Quality)
This configures the recording quality.
Current Total Data Rate (Mbps)
It shows the average recording data capacity of all channels per second.
