OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 54
IP Address
IP Address is for the connection between DVR and Control Center and also for web connection from
Webviewer. (But, Net Mask, Gateway should be configured.)
Net Mask
Net Mask makes range of IP address available. It should be received from network administrator.
Gateway
Gateway is necessary to communicate IP, it should be received from network administrator.
DNS Server
DNS1 is mandatory item to regist and use WRS and it should be asked to network administrator.
UPnP Port Forwarding
When using Internet Sharing device supporting UPnP, this function eable all connected DVR to do Port
forwarding and they can be connected to Internet with IP address of Internet Sharing device.
1) Configure two DVRs with DHCP On.
2) Please, check if DVRs which are connected to Internet Sharing Device are allocated with official IP.
3) Configure DVR port of DVR(A) and DVR(B) as 81 and 82 individually.
4)
Configure UPnP function of Internet Sharing Device as “ON”.
5)
Configure UPnP Port Forwarding function of DVR as “ON”.
6) Please, check
if Port Forwarding Status message is changed from “Not Available” to “Port Mapping is OK”.
7) Finally, if user accesses DVR(A) with the IP address with port number 81 or DVR(B) with the IP address
with port number 82, user can access DVRs.
Port
Port is necessary for Control Center and Webviewer connection.
Reference : Basic port is 80 and if using PPPoE modem and AP, be careful typing port number.
Network Stream
Network Stream function is to configure resolution, frame, image
quality for monitoring in Control Center, WebViewer, and Web Eye
Application. The stream set by this menu makes smoother network
monitoring.
Bandwidth
Bandwidth is to configure the maximum transmission speed. Its default value is 0.0Mbps and it means no limit
for network data transmition. (But, it should be configured by administrator.)
