OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 30
Daylight Saving
This menu is linked with “time zone” setting. For example, if the daylight savings applies in the country turn to
“ON” but in other counties were it does not applieds for daylight saving used the “OFF” option and
additionally the user can configure the daylight saving option manually for the counties that were not applied,
and in this case, you can use “Custom” option to set.
The second is for selecting a month, week, and day to define the start and end times of DST.
NTP
Please set NTP ‘On’ then select ‘Public’ in Client Mode for DVR to set time automatically via internet
connection
Date Notation
Please select “Date Format” and pick ‘YYYY/MM/DD, MM/DD/YYYY or DD/MM/YYYY
Time
Please select each Time/Date setting its value and press [Apply Date/Time] to confirm setting
Apply
Most setting values are applied automatically,
when exiting form the related menu page. But “Date” & “Time”
setting will not applied automatically because they may critically affect the file system of the recorded HDD. To
apply Date/ Time settings confirm with [Apply Date/Time] buttons manually. In case of chaing time, time of
existing data will be shown as user has changed.
3.4.2.3.
Record Setting
MENU
RECORD
RECORD
[Continuous&Event Record] [Manual&Event Record]
Continuous Recording
Continuous or Event recording starts automatically once DVR boots based on Program setting value.
Manual Recording
Manual record can be configured in “Program” of record menu and Manual / Event record is
available to Start/Stop with pressing [REC] button on front panel.
