OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 57
6.3.1.1.
Using Channel
Configure whether the camera is used or not.
If you want to exclude certain cameras even with video signal, user should set status off.
6.3.1.2.
Title
Configure camera name. Text input box could be different depending on menu but its setting method is the
same.
6.3.1.3.
Input Resolution
Thi
s shows resolution of camera connected with DVR and user can’t change this.
6.3.2. Monitor Setup
MENU
DEVICE
MONITOR
This menu is to configure option for Monitor
Event Pop up
If specific channel uses MD, Sensor Input, it makes the relevant
channel popup as single or multi screen. To use this function, event
should be set to event schedule in recording setup and MD / Sensor
configuration should be done also.
If event popup time is set as off, event popup will not work.
Event pop-up can be configured per second from 1 to 10 seconds. If user set Event pop-up as keep, it will
show continuously on the popup screen until the time user push any certain button.
The way to composing
Users can compose 4 division screens view and
position each channel freely.
Minimum 1 unit and Maximium 4 units are available to
be registered and use.
(But in 4ch DVR, it is not supported).
Channel
Converting
Users can convert certain channels through.
coverting function in live/Playback mode. Checked
channel don’t be shown in live/Plabck.
