OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 43
6. Configuration
6.1.
System Setup
Time, disk, and authorization can be configured.
6.1.1. Date/Time
MENU
SYSTEM
DATE/TIME
Time set should be configured prior to the recording.
Time configuration is very important to protect the recording data.
Time change on recording is not recommended.
Time zone configuration value of factory default is “UTC 00:00
Dublin”
6.1.1.1.
Time Setup
<Caution>
Under recording, if a user changes the, it will affect the time change on previously recorded video.
Therefore, we recommend backup before chaning time.
Standard Time
Set time in which installed DVR.
Daylight Saving
This menu is synchronized with time zone configuration menu. It means when daylight saving area is set, this
function works. Daylight saving applicable area is all the same with Time zone of Microsoft Windows. Users
can select whether to apply daylight savings or not where DVR is installed in Daylight saving applied zone.
Time
Configure date among “MM/DD/YYYY”, “YYYY/MM/DD”, “DD/MM/YYYY”.
Apply
User must push “Apply Date/Time” button. And you will see the below
message box.
