OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 58
Display Information
Display information is to configure which
information will be shown on live view and
playback view. In live view, there are the Channel
name, Text, and Status Bar. In playback view,
time, channel name, event, text Command show
and hiding can be configured.
User sequence Configuration
This menu is to edit function of user sequence configuration. User can
configure 16 sequence modes and it is available to set from 1 to 60
seconds.
In Sequence mode, users can configure channel or division mode and
sequence time from 5 to 60 seconds. If user set it to Off, this function will
not work.
The default setting for Alarm restore is off. In case alarm popup occurs
during sequence mode sequence mode will turn off. When Alarm restore is
set on, sequence mode will ba activated again after alarm popup time
finishes.
Sequence mode can start when user pushes [SEQ] button.
To escape from Sequence mode, please, push [SEQ] button one more time.
<Note>
1) User should set in order without any missing during SEQ channel configuration. If there is an item that is
“Not Set”, the SEQ channel that is being sequenced before “Not Set” and SEQ channel is automatically
excluded after setting “Not Set”.
