OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 68
6.4.4. Sensor
MENU
EVENT
SENSOR
This menu is to setup the existing sensor input and the type of
sensors. Users can configure sensor by each channel. If sensor is
selected as All, N.O, or N.C. it is applied to all channels. Users can
set different options like N.O, N.C, or Off after selecting each
channel.
Name
Description
N.O
Normally
-
open
(NO) contacts connect the circuit when the relay is activated; the circuit is
disconnected when the relay is inactive.
N.C
Normally
-
closed
(NC) contacts disconnect the circuit when the relay is activated; the circuit is
connected when the relay is inactive.
Off
Sensors not in use.
6.4.5. Preset
MENU
EVENT
PRESET
In PTZ function, make configured preset work according to sensor
i
nput. (don’t understand)
Please, configure preset per PTZ. After selecting channel in preset
menu, select event to work preset.
Event can select sensor, MD, Text, its preset can be configured up to
16.
6.5.
Recording Setup
There are 4 modes for recording
– schedule recording, manual recording, Continuous Recording, and Event
Recording. Schedule Recording records automatically in accordance with the configured schedule and Manual
Recording records via pushing “REC” button.
Continuous Recording records continuously upon initial system boot up. Event Recording records when an
event occurs
6.5.1. Manual/Continuous/Schedule recording setup
MENU
RECORD
RECORD
Users can select the recording mode from manual, continuous, or schedule recording.
And their resolution, frame rate, quality will be in accordance with the program.
