OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 33
1)
Selecting COM1 port and configure “Text”in Device
2) Setup the value of Baud Rate/Parity/Stop bit/Data bit with the device.
3.5.4.2.
Text Setting
MENU
DEVICE
TEXT
1) Configure relevant text information.
<Reference>
Since external device cannot be recognized, before installing reffered back to Vendor.
[Serial] [Text]
3.5.5. HDD Use
※
Please, ask to distributor or manufacturer for available HDD list.
3.5.5.1.
HDD Registration & Format
MENU
SYSTEM
DISK
After mounting HDD and booting system, “Disk Manager” will
execute automatically as side image.
If not, please, check the connectivity of HDD
1) Select HDD in installed HDD list and register it formatted.
2) Mark e
nable as “YES” from Fomatted HDD list
3.5.5.2.
HDD Replacement
1) Turn off the DVR and take off to-be replaced HDD then install new HDD.
2)
Turn on the DVR then go to “Disk Manager” and select removed HDD and select “YES” when there is
“Removed disk will be Confirmed” message.
3) Select new installed HDD then register it formatted.
4)
Mark Enable as “YES” from Fomatted HDD list
