OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 63
Normal Event source
Users can configure Sensor, motion detection, V-loss,
& Text.
Model
Sensor
MD
V-Loss
Text
OSHD-410H
4ea
4ea
4ea
1ea
OSHD-810
8ea
8ea
8ea
1ea
System Event source
System Event source can configure Bad block,
Disk full, Fan error, authorization failure,
WRS registration failure, Mirroring Disk Full ,
Power on , & Abnormal recording stops.
6.4.2.1.
Relay 1~4
Event notification will be achieved throughout relay 1~4 as
much as user set duration time.
6.4.2.2.
Buzzer
Event status will be reported by buzzer based on time duration
set by user.
6.4.2.3.
E-Mail Setup
Input E-mail address to receive event alarm by E-Mail.
Selecting Event Action Notification
There are 7 actions
– relay 1 to 4, buzz, E-Mail,
FTP, & Twitter
Action Notification Duration
Duration Time starts with relay and buzzer setup and
the notification alert will be active within the duration
time set by the user.
E-mail and Twitter will be transmitted within every
configured time interval.
If duration time is set off , Sync event will not be
working.
