OSHD-410H & OSHD-810 & OSHD-1610
Install & User Manual - Firmware 3.X 44
<Caution>
Except date/time configuration, other records automatically, but “date/time” configuration influences
critical effect to HDD recording file system,
It doesn’t record automatically. To apply the changed value,
user must press [Apply] button.
6.1.1.2.
NTP Setup
MENU
SYSTEM
DATE/TIME
NTP
NTP (Network Time Protocol) synchronizes the time of all connected
device. To set DVR time to standard time open server which offers
standard time on the network and client which is connected to open
server to receive time and synchronize it with standard time. Besides
that DVR can be set as server to offer standard time to other devices
and can be set as both server and client as well.
NTP Mode
Configure NTP mode of DVR
– Client / Server / All
Name
Description
Client
Time synchronization is able in open standard time external server or internal server.
Server
Set user’s DVR as NTP server then it is able to offer standard time to other DVR or
devices.
All
It can be used as both client and server.
NTP Server Loc.
When NTP mode is client, it is on Enable. Configure yes or no wither NTP server is in Local Network or Public.
NTP Local server IP
In NTP local server Enable, configure server ip. Input IP address of NTP server or DVR set by NTP server in
local network.
Interval
Configure interval of time sync.
Caution: If use NTP client mode, user must set NTP on.
