Oracle X7-2, Installation Manual

Page: 89 / 148

Modify Network Settings
1.
Log in to Oracle ILOM as an Administrator from the web interface or CLI. For
details, see “Accessing Oracle ILOM” on page 84 .
2.
To modify the SP network settings, use either the Oracle ILOM web interface or
CLI:
■
From the web interface:
a.
Click ILOM Administration → Connectivity → Network.
b.
Modify the settings on the Network Settings page, as required. For
details, click the
More Details
link.
c.
Click Save.
Note -
All user sessions on the SP are terminated upon saving the IP network property changes.
To log back in to Oracle ILOM, use the newly assigned service processor IP address.
■
From the CLI:
a. To view the assigned IPv4 and IPv6 network settings on the SP, perform
the following:
For IPv4, type:
show /SP/network
For IPv6, type:
show /SP/network/ipv6
b. To view the descriptions about each IPv4 and IPv6 network property,
perform the following:
For IPv4, type:
help /SP/network
For IPv6, type:
help /SP/network/ipv6
c.
To modify the IPv4 and IPv6 network properties on the SP, issue the
set
command.
IPv4 Example:
set /SP/network state=
enabled
|
disabled
pendingipdiscovery=
static
|
dhcp
pendingipaddress=
value
pendingipgateway=
value
pendingipnetmask=
value
IPv6 Example:
Using Oracle ILOM 89