Oracle X7-2, Installation Manual

Page: 84 / 148

Oracle ILOM Hardware and Interfaces
■
Host-to-ILOM interconnect – For information, refer to Dedicated Interconnect
SP Management in the Oracle ILOM Administrator's Guide for Configuration and
Maintenance, Firmware Release 4.0.x at
http://www.oracle.com/goto/ilom/docs
.
For information about Oracle ILOM features, refer to the Oracle Integrated Lights Out Manager
(ILOM) Documentation Library at
http://www.oracle.com/goto/ilom/docs
.
Oracle ILOM Hardware and Interfaces
The following table lists the components and functions of Oracle ILOM.
Component Function
Hardware ■ Embedded service processor (SP) chipset that
monitors the status and configuration of components
such as fans, storage drives, and power supplies
■ Two back panel external connections: NET MGT
port Ethernet connection and SER MGT port RJ-45
serial management connection
Interfaces ■ Web browser interface
■ Command-line interface (CLI), available over SSH
or through a direct connection to the SER MGT port
■ IPMI TLS (Refer to IPMI TLS in the Oracle ILOM
Protocol Management Reference for SNMP and
IPMI )
■ SNMP v3 interface
Related Information
■
Oracle Integrated Lights Out Manager (ILOM) Documentation Library at:
http://www.
oracle.com/goto/ilom/docs
Accessing Oracle ILOM
You can log in to the Oracle ILOM command-line interface (CLI) locally using the RJ-45 serial
management port (SER MGT). You also can log in to the Oracle ILOM web interface or CLI
remotely using one of the network ports on the server.
To log in to Oracle ILOM, follow these procedures:
84 Oracle Servers X7-2 and X7-2L Installation Guide • October 2017