where
username
is a user account with Administrator privileges, and the
SPIPaddress
is the IP
address of the server module service processor.
The default Oracle ILOM Administrator account user name is
root
, and the password is
changeme
.
After a successful log in to the server module Oracle ILOM, the Oracle ILOM prompt (
->
)
appears.
■
If the server module SP IP address is incorrect, see
“Display Server Module Oracle ILOM SP IP
Address (CLI)”on page 49
to view the server module SP IP address using Oracle ILOM CMM.
■
If this default Administrator account has been changed, contact your system administrator
for an Oracle ILOM user account with administrator privileges.
Note –
To enable first-time login and access to Oracle ILOM, a default Administrator
account and its password are provided with the system. To build a secure environment, you
must change the default password (changeme) for the default Administrator account (root)
after your initial login to Oracle ILOM. If this default Administrator account has since been
changed, contact your system administrator for an Oracle ILOM user account with
Administrator privileges.
Use Oracle ILOM CLI to configure Oracle ILOM and manage the server module.
Refer to Oracle ILOM 3.1 documentation for more information about how to use the CLI
interface to configure Oracle ILOM. See
http://www.oracle.com/goto/ILOM/docs
.
■
“5. Set up Server Module Software and Firmware (Oracle System Assistant)” on page 59
Accessing the Host Console
Connecting to a server module host console through Oracle ILOM allows you to perform
actions as if you were at the host.
Connect to a server module host console to perform the following tasks:
■
Access the server module BIOS setup program remotely
■
Install an OS on the server module.
■
Configure an OS on the server module.
■
Configure or install other software on the server module.
To connect to a server module host console, choose one of the following methods:
■
“Access Host Console (CLI)” on page 55
■
“Access Remote Host Console” on page 55
■
Access the server module serial console using Oracle ILOM command-line interface.
See
“Set Up Server Module Using Local Serial Connection” on page 40
.
4
Next Steps
Accessing the Host Console
Sun Blade X4-2B Installation Guide • March 2014
54
Summary of Contents for X4-2B
