Oracle X4-2B, Installation Manual

Page: 45 / 118

Accessing Oracle ILOM
This section describes how to access the Oracle Integrated Lights Out Manager (ILOM) and set
up the service processor (SP) network configuration for your server module.
The following table provides information about Oracle ILOM setup tasks.
Task Link
Determine Server Module Oracle ILOM SP IP
Address. (KVM and Network connections only) “Determining Server Module Oracle ILOM SP IP
Address” on page 45
Log in to Oracle ILOM web interface. “Log In to Oracle ILOM SP (Web Interface) ” on page 52
Log in to Oracle ILOM CLI. “Log In to Oracle ILOM SP (CLI) ” on page 53
Access the host console through Oracle ILOM.
(Optional) “Accessing the Host Console ” on page 54
Determining Server Module Oracle ILOM SP IP Address
Before you access the server module service processor (SP) Oracle ILOM through a network or
KVM connection, first obtain the server module's Oracle ILOM SP IP address.
Choose a method of obtaining a server module SP IP address, as described in the following
sections:
■
“Display Server Module Oracle ILOM SP IP Address (Web Interface)” on page 45
■
“Display Server Module Oracle ILOM SP IP Address (CLI)” on page 49
The SP IP address is not required to connect to the server module serial port and log in to
Oracle ILOM CLI. Skip this task and see
“Log In to Oracle ILOM SP (CLI) ” on page 53 .
▼
Display Server Module Oracle ILOM SP IP Address
(Web Interface)
Verify that the chassis CMM is:
■
Connected to the network through the Ethernet management port.
■
Configured
■
Operational
■
If the chassis CMM network connection is not operational, refer to the chassis
documentation at
http://www.oracle.com/goto/SB6000/docs
.
Access a web browser.
1
2
Determining Server Module Oracle ILOM SP IP Address
45