Oracle X4-2B, Installation Manual

Page: 36 / 118

c. The green OK/Power status indicator blinks briefly once every 3 seconds.
The server module is in standby power mode after the SP completes its boot cycle.
1 Locate status indicator LED (white).
Press button to identify server.
2 Ready to Remove status indicator LED (blue). Main power removed.
3 Service Action Required status indicator LED (amber). A fault condition has occurred.
4 OK/Power status indicator LED (green). Modes:
■
SP booting - Fast blink, 0.125 second on, 0.125 second off.
■ Standby power – Blink, 0.1 second on, 2.9 seconds off.
■
Host booting – Slow blink, 0.5 second on, 0.5 second off.
■
Full power – Steady on.
5 Power button. Press briefly to toggle the server between standby and full power.
Caution –
Pressing the Power button for more than four seconds when the server module is in full power initiates
immediate shutdown to standby power. Can cause data loss.
d. (Optional LED lamp test) Press and hold the Locate LED until all the front panel LEDs light up.
The lamps remain lit for 15-20 seconds.
Refer to the Sun Blade X4-2B Service Manual .
3. Insert the Server Module Into a Chassis
Sun Blade X4-2B Installation Guide • March 2014 36