Oracle X4-2B Installation Manual Download Page 61

Page: 61 / 118

▼

Launch Oracle System Assistant (Locally)

Before you begin to launch Oracle System Assistant locally, you must be physically present with
the Sun Blade X4-2B and have access to the following:

■

Multi-port UCP cable

■

VGA monitor

■

USB Keyboard

■

USB Mouse

Choose a method to launch Oracle System Assistant locally on a server module, as described in
the following sections:

Ensure that the server module is in standby power mode.

Verify that the Power/OK LED blinks slowly. See:

“Front Panel Features” on page 10

Connect locally to the server module.

See:

“Set Up Server Module Using Local KVM Connection” on page 42

Press the front-panel Power button to power on the server to full power mode.

■

The server module boots.

■

POST messages appear on the monitor.

After you see the POST message for Oracle System Assistant, press the F9 function key.

■

Oracle System Assistant boots.

■

Oracle System Assistant main screen appears.

Accessing Oracle System Assistant

Summary of Contents for X4-2B























































































































Search results

Summary of Contents for X4-2B

Reviews:

Related manuals for X4-2B

Brands by name

Popular brands

Oracle X4-2B, Installation Manual

Search results

Summary of Contents for X4-2B

Reviews:

Related manuals for X4-2B

Brands by name

Popular brands