Oracle X4-2B, Installation Manual

Page: 29 / 118

■
Wear an antistatic grounding strap connected to a metal surface on the chassis when you
work on system components.
■
Place components on an antistatic surface, such as an antistatic discharge mat, an antistatic
bag, or a disposable antistatic mat.
Note –
This server is fully compliant with the Reduction of Hazardous Substances (RoHS)
Directive.
Related Information
■
“Insert the Sun Blade X4-2B Server Module Into a Chassis” on page 33
Install Optional Components
Optional components for the Sun Blade X4-2B server module might be packaged and shipped
separately. If applicable, install optional components before you install the server module into
the system chassis (such as DIMMs or drives).
The following optional server module components can be ordered and purchased separately:
Optional component Description
Processor assembly
options Refer to Sun Blade X4-2B Service Manual .
DDR3 DIMM memory kits Refer to Sun Blade X4-2B Service Manual .
Storage drives Refer to Sun Blade X4-2B Service Manual .
■ Hard drives (HDDs)
■
Solid state drives (SSDs)
USB sticks The two internal USB ports are accessed from the Sun Blade X4-2B server
module's rear panel. See
USB Stick below.
Expansion Modules (EMs) Refer to Sun Blade X4-2B Service Manual .
■
Fabric expansion modules (FEMs)
■ RAID expansion modules (REMs)
Note –
The procedures in this guide do not cover cabling of PCIe ExpressModules
(PCIe EMs) or network express modules (NEMs) installed in the chassis and
connected to the server module through the chassis midplane. Refer to the
chassis, PCIe EM, or NEM documentation for instructions on cabling these
components.
Install Optional Components
29