Oracle X4-2B Installation Manual Download Page 66

Page: 66 / 118

The Oracle System Assistant System Overview screen appears.

Click

Configure Hardware

The Configure Hardware RAID Configuration screen appears.

From the HBA drop-down list, select the host bus adapter (HBA).

SG-SAS6-R-REM-Z

Select the RAID level.

SG-SAS6-R-REM-Z: Use RAID 0, 1, or 10

Oracle System Assistant supports only RAID 0, RAID 1, and RAID 10.

From the list in the Available Disks section, select the disks to include in the volume.

Click

Create Volume

The volume appears in the Created Volumes section list after the volume is created.

Click

Volume Details

Type a volume name.

(Optional for SG-SAS6-R-REM-Z HBA) Set the volume as bootable.

■

In the Created Volumes section, select the volume that you just created.

■

Click

Set Volume for Boot

Note –

Skip this step for the SG-SAS6-REM-Z HBA.

■

“7. Set Up an Operating System and Drivers” on page 73

Next Steps

SG-SAS6-R-REM-Z Host Bus Adapter

Sun Blade X4-2B Installation Guide • March 2014

Summary of Contents for X4-2B























































































































Search results

Summary of Contents for X4-2B

Reviews:

Related manuals for X4-2B

Brands by name

Popular brands

Oracle X4-2B, Installation Manual

Search results

Summary of Contents for X4-2B

Reviews:

Related manuals for X4-2B

Brands by name

Popular brands