Oracle X4-2B Installation Manual Download Page 68

Page: 68 / 118

The Oracle System Assistant System Overview screen appears.

Click

Configure Hardware

The Configure Hardware RAID Configuration screen appears.

From the HBA drop-down list, select the host bus adapter (HBA):

SG-SAS6-REM-Z (SGXSAS6INTZ)

Select the RAID level.

Use the following configuration for SGXSAS6INTZ: RAID 0

From the list in the Available Disks section, select the disks to include in the volume.

Click

Create Volume

The volume appears in the Created Volumes section list after the volume is created.

Click

Volume Details

Type a volume name.

■

“7. Set Up an Operating System and Drivers” on page 73

Configure Storage Drives (LSI Configuration Utilities)

This section contains the following LSI configuration utilities and related tasks to configure
storage drives:

To create a RAID volume (virtual drive) with the disk before installing an operating system,
choose one of the following methods:

Create a RAID volume (virtual drive) when you:

Link

Use a server configuration RAID volume level 5, 6, 10, 50, or 60
that is not supported by Oracle System Assistant.

“Configure Storage Drives (LSI WebBIOS
Configuration Utility)” on page 69

Next Steps

Configure Storage Drives (LSI Configuration Utilities)

Sun Blade X4-2B Installation Guide • March 2014

Summary of Contents for X4-2B























































































































Search results

Summary of Contents for X4-2B

Reviews:

Related manuals for X4-2B

Brands by name

Popular brands

Oracle X4-2B, Installation Manual

Search results

Summary of Contents for X4-2B

Reviews:

Related manuals for X4-2B

Brands by name

Popular brands