a. Pull out the right blue hinge pin (opposite the wire routing of the chute sensor) to unlock the
printer mechanism housing.
b. Turn the printer mechanism housing open.
c. Manually turn the motor pinion gear (the brass gear in the illustration) clockwise until the
jammed paper is released from the platen roller.
d. Remove the jammed paper.
e. Close the mechanism housing.
f. Push the blue hinge pin in to lock the housing.
Figure 7-1 Clear Jammed Paper
Doc. No.: M1010 Rev.: 10
Page 33 of 98
Summary of Contents for Petro Vend 200 M1010
