OPW Petro Vend 200 M1010, Installation, Operation And Maintenance Manual, Page: 81 / 98

NOTE: The Cellular Modem, Plate, the 8-32 Screws and two (2) of the 8-32 KEP nuts are
assembled at the factory.
NOTE: Part Numbers in Green Bold text in the component list above are availabe as
replacement items. See the newest Fuel Control Price List for order information and pricing.
NOTE: If you use Phoenix or PuTTY to configure your system you must use the IP Address of
your Cellular Modem to connect. You must also use Port 8001.
The Modem IP address can be found on the sticker that is attached to the front of the unit (see
the illustration below).
Modem Installation
1. Align the four (4) mounting holes of the Universal Mounting Plate over the four (4) studs (below the
FSC plate and left of the Power Supply). Put four (4) 8-32 Kep Nuts on the studs and tighten them.
Doc. No.: M1010 Rev.: 10
Page 81 of 98