5. Put the six (6) nuts (50-0005) on the screws and turn them clockwise with a 5/16” socket or nut driver
until they are tight.
6. Connect one of the two 11-Pin connectors of the Alpha Keypad Cable (20-1687) into the J-22
connector (labeled "ALPHA") on the Main Board as shown. The clip side of the connector should point
down.
7. Connect the other 11-pin connector of the cable into the connector on the rear of the Keypad. The clip
side should point to the left.
Doc. No.: M1010 Rev.: 10
Page 52 of 98
Summary of Contents for Petro Vend 200 M1010
