Media Type Menu
Media Type
: This option allows the manager to set up input mode restrictions for all card types. The options
are “Reader” and “Keyboard” and they are mutually exclusive. Push the F3 function key on the keyboard to
toggle between Reader and Keyboard options.
Reader is the default for all three card types (Driver, Vehicle and Single). Driver and Vehicle card types are
used with the
"Dual Card Security Feature" on page 49
factory-installed purchased option.
Card input is accepted through keyboard or physical reader in test mode if Keyboard is the specified input
source for a card type and one of the reader types (magnetic, proximity or ChipKey) is enabled.
NOTE:
If a Driver card is entered with the keyboard when Reader is specified and the Vehicle
card is set up for Keyboard, the error message below will come into view.
"INVALID - MUST BE CARD/KEY"
NOTE:
If the user tries to set up a Vehicle card as a Manager card, the error message below
will come into view.
"Vehicle card cannot be used as manager card"
7.3 Pump Management
The
Pump Management
menu is used to edit configuration settings for the following items pertaining to the
pump management. Select the menu item number that corresponds with “Pump Management” and press
“Enter:”
l
Select Pump Terminal
l
Select Relay Position
l
Configure Pump
Select Pump Terminal
: This option is a non-selectable item, which defaults to 1.
Doc. No.: M1900 Rev.: 8
Page 40 of 65
