Optos P200TxE User Manual Download Page 57

Page: 57 / 84

Chapter 5 - Manage the system

6.7 Quality checks

Your system automatically runs specific checks during start up and shut down.

6.7.1 Self-tests

Each time the system starts it runs a series of self-tests. If any problems are identified please follow the on-
screen instructions and take appropriate action or contact your Optos representative (see

Contact us

page 79).

6.7.2 Status indicator

The status of the scan head is identified using different colored lights on the status indicator. For more
information (see

System parts

on page 23).

TABLE 8: List of status indicator lights

Status color

Description

White

Switching on and running self-tests

Green

Ready for use

Yellow

System error

Blue

System in standby mode

6.7.3 Software update

Each time your scan head shuts down it will check for software updates.

Please allow up to 15 minutes for the update to complete. You will be instructed when it is safe to switch off.

NOT

accept updates when you are about to image a patient.

Part Number: G110230-003-ENG

Page 57 of 84

English

Summary of Contents for P200TxE
















































































Search results

Summary of Contents for P200TxE

Reviews:

Optos P200TxE, User Manual, Page: 57 / 84

Search results

Summary of Contents for P200TxE

Reviews: