Optos P200TxE User Manual Download Page 28

Page: 28 / 84

Chapter 2 - Introduction

Annotation and measurement tools that provide graphical mark-ups on the images. These mark-ups
are saved with the patient medical record.

Image measurements including distance and area measurements, and cup-to-disk ratio.

You can also use the

3D Wrap

view for patient education purposes. The

3D Wrap

view displays the

current image on a 3D model eye. You can run the animated "Fly-Through" or demonstrate
refractive errors and Intraocular Lenses.

You can run the review software from the following:

Double-click the desktop icon

2.7.5 Accessories and detachable parts

CAUTION

The use of parts and cables other than those specified may result in degraded
electromagnetic compatibility of the system.

TABLE 2: List of parts

Part Number

Part

M13322

Head rest

M13230

Chin rest

B13177

Face pad

B14294

Dust cap

A10791

Touch screen

M14469

Fabric cover

A10732

Hand control

A10688

Optos

Advance

image server

C5031

Mains power cable

C5881

Network cable

Where the Optos

Advance

image server software is installed on a compatible virtual machine the physical server will

NOT

be supplied.

Mains power cables required for the region will be supplied.

Page 28 of 84

Part Number: G110230-003-ENG

English

Summary of Contents for P200TxE
















































































Search results

Summary of Contents for P200TxE

Reviews:

Optos P200TxE, User Manual, Page: 28 / 84

Search results

Summary of Contents for P200TxE

Reviews: