Operation
Version 1.1.3 - 2020-07-21
42
Translation of the original instructions
B34H | B34HV
GB
B34H_B
34HV_
GB_
4
.f
m
5.8.3
Disassembly with the integrated drill drift B34H / B34HV
ATTENTION!
The tool and/or the drill chuck will fall down. Hold
the tool
or the drill chuck while drifting it out.
ATTENTION!
Do not try to expel the tool when it is in the
intermediate position. This might cause damages
of the integrated drill drift or of the feed handle.
With the below described procedure the taper mandrel
is being loosened from the drilling spindle.
Move the sleeve as far down until the locking pin
can be moved a little bit (Img. 4-16 (b) interme-
diate position).
Move the locking pin
so far, until the locking pin
engages completely (Img. 4-16 (c) expulsion posi-
tion).
Abb.5-14: Disassembly B34H / B34HV
Press the sleeve lever
with a fast and powerful movement upwards.
The taper mandrel is pressed out of the drill spindle.
Abb.5-15: Functional diagram of the drill drift (sectional view)
2
1
3
3
1
1
2
a)home position
b) intermediate position
c) expulsion position
