Safety
Version 1.1.3 - 2020-07-21
15
Translation of the original instructions
B34H | B34HV
GB
B34H_B
34HV_
GB_
1
.f
m
1.12
Drilling table
Seats for T-slots are atta-
ched to the drilling table.
WARNING!
Risk of injury due to
workpieces flying off at
high speed. Securely fix the
workpiece on the drilling
table.
Abb.1-3:
Drilling table
1.13
Separating protective devices
1.13.1 Protective cover of the V-belts
A protective cover for the belt pul-
leys is mounted on the drilling
head. A switch is integrated in the
protective cover which monitors
that the cover is closed.
INFORMATION
You cannot start the machine if the
protective cover is not closed.
Abb.1-4:
Protective cover
1.13.2 Drill chuck protection
Adjust the protective equipment to
the correct height before you start
working.
To do so, detach the clamping screw,
adjust the required height and re-
tighten the clamping screw.
A switch is integrated in the fixture of
the spindle protection which moni-
tors that the cover is closed.
Holding fixture for
inserted tongues
Protective
cover
Clamping screw
Drill chuck
protection
