Assembly
Version 1.1.3 - 2020-07-21
25
Translation of the original instructions
B34H | B34HV
GB
B34H_B
34HV_
GB_
3
.f
m
4
Assembly
4.1
Scope of delivery
When the machine is delivered, check immediately that the machine has not been damaged
during transport and that all components are included. Compare the parts supplied the informa-
tion on the packaging list.
4.1.1
Available optional machine accessories
4.2
Installation and assembly
4.2.1
Requirements to the installation site
Organize the working area around the geared drill according to the local safety regulations.
INFORMATION
In order to attain good functionality and a high processing accuracy as well as a long durability
of the machine the installation site should fulfil certain criteria.
Please observe the following points:
The device must only be installed and operated in a dry and well-ventilated place.
Avoid places nearby machines generating chips or dust.
The installation site must be free from vibrations also at a distance of presses, planing
machines, etc.
The substructure must be suitable for the geared drill. Also make sure that the floor has suf-
ficient load bearing capacity and is level.
The substructure must be prepared in a way that possibly used coolant cannot penetrate
into the floor.
Any parts sticking out such as stops, handles, etc. have to be secured by measures taken
by the customer if necessary in order to avoid endangerment of persons.
Provide sufficient space for the staff preparing and operating the machine and transporting
the material.
Also consider that the machine is accessible for setting and maintenance works.
Provide for sufficient illumination (Minimum value: 500 lux, measured at the tool tip). At little
intensity of illumination an additional illumination has to be ensured e.g. by means of a
separate workplace lamp.
INFORMATION
The mains plug of the geared drill must be freely accessible.
4.2.2
Mounting of base and drill column
WARNING!
Danger of crushing when assembling and installing the machine components.
Put the stand on the floor and fix the drill column to the stand.
Designation
Item number
Machine vice MSO 100
3000100
Machine vice BMS 100
3000010
Machine vice BSI 100
3000210
Clamping tool kit SPW 12
3352017
Twist drills HSS / MK3
3051003
Reducing sleeve MT4-MT3
3050664
Titanium twist drill kit 13 mm
3051010
