OPTIMUM Maschinen 3020333 Operating Manual Download Page 41

Page: 41 / 98

Operation

Version 1.1.3 - 2020-07-21

Translation of the original instructions

B34H | B34HV

B34H_B

34HV_

GB_

5.8

Disassembly, assembly of drill chucks and drill bits

5.8.1

Mounting drill chuck B34H / B34HV

The quick-action drill chuck
is secured through a form-
fit union (driver) against
twisting in the drilling
spindle.

A friction-locking union
holds and centers the
quick-action drill chuck
with the taper mandrel in
the drilling spindle.

Abb.5-12: Taper mandrel



Check and, if necessary, clean the conical seat in the drilling spindle and at the taper mand-
rel of the tool or the quick-action drill chuck.



Press the taper mandrel into the drilling spindle.

5.8.2

Quick action drill chuck

The drill chuck consists of two
parts(1 and 2).



Hold the upper part (No.1)
of the drill chuck. With the
lower part (No. 2) of the drill
chuck one can firm and/or
loose-turn the cheeks of the
drill chuck.



Turn the tool (drill) firmly.

Abb.5-13: Quick action drill chuck

CAUTION!

Make sure that the clamped tool is firmly and correctly fitted.

Drill sleeve

Driver

Taper mandrel

Upper part (No.1)

Quick action drill chuck

Lower part (No.1)

Quick action drill chuck

Tool (drill)

Summary of Contents for 3020333



































































































Search results

Summary of Contents for 3020333

Reviews:

Related manuals for 3020333

Brands by name

Popular brands

OPTIMUM Maschinen 3020333, Operating Manual

Search results

Summary of Contents for 3020333

Reviews:

Related manuals for 3020333

Brands by name

Popular brands