Operation
Version 1.1.3 - 2020-07-21
38
Translation of the original instructions
B34H | B34HV
GB
B34H_B
34HV_
GB_
4
.f
m
5.6.1
Design
Abb.5-7: Digital display
ON / O,
switches the display on and resets the reading of the display to "0".
mm/in,
converts the measuring unit from
millimetres
to
inches
and vice versa.
OFF,
switches the display off.
,
performs a value increase.
,
performs a value decrease.
INFORMATION
Before inserting the new battery, wait about 30 seconds. Please make sure, that the contacts
are metallically bright and free from coverings which result from bleeding or gassing batteries.
Grip the new batteries only with plastic forceps, if possible not with the hand due to the forma-
tion of oxide and never with metal forceps in order to avoid a short circuit. In most cases the
round cell will be inserted into the digital display with the marking upside. After inserting the
round cell, the battery compartment has to be closed again.
5.6.2
Malfunctions
LCD display
Conversion
mm/inch
Value increase
Value decrease
Off - switch
On - switch
On switch Zeroing
Battery bay
Malfunction
Cause/
possible effects
Solution
Flashing of the display
•
Voltage too low
•
Change battery
Screen doesn’t refresh
•
Disturbance in the circuit
•
Remove the battery, wait 30
seconds and reinsert the battery.
No data visible
•
No power supply
•
Battery voltage less than 1,55V
•
Clean battery contacts
•
Replace battery
