Assembly
Version 1.1.3 - 2020-07-21
29
Translation of the original instructions
B34H | B34HV
GB
B34H_B
34HV_
GB_
3
.f
m
4.2.4
Fitting the drill head
Put the intermediate plate on
the drilling column.
Fix the intermediate plate with
the cap screws on the drilling
column.
Put the drilling head on the
intermediate plate and turn it
as much until is aligned with
the stand.
Fix the drilling head with the
cap screws on the intermedi-
ate plate.
Abb.4-7:
Assembling drill head
4.3
Installation
Check the horizontal orientation of the base of the geared drill with a spirit level.
Check if the underground is sufficiently stable and rigid. The total weight amounts to 276 kg
and 290 kg.
Position the geared drill on the intended foundation.
Fix the geared drill in the provided through-holes on the machine foot.
WARNING!
The condition of the underground and the fixing type of the machine foot to the
underground must be in a way that it can bear the loads of the geared drill. The
substructure needs to be even. Check if the underground of the geared drill is level
using a spirit level.
Cap screws
Intermediate plate
Cap screws
