OPTIKON 161601 Manual For Installation And Use Download Page 27

Page: 27 / 94

Keratron™ Nova

Manual for installation and use

OPTIKON 2000

Cod. 161601EN

5-11

2016-12-28 Rev.B

5.4 LIGHT EMISSION

Keratron™ Nova contains within it different light sources, it is a

LED Class 1 device

in accordance with IEC60825-1.

In all operating conditions

the maximum output power is lower than that power

specified in the table below:

Operating condition

Wavelength

peak

Emitted power

meas

Topography (visible LED)

594 nm

140μW (<LEA Class 1)

Pupillometry (Infrared LED)

950 nm

150μW (<LEA Class 1)

If the cone is removed while capturing or calibrating, the lamp is turned off in order
not to expose the operator to dangerous radiation.

5.5 CIRCUIT DIAGRAMS

Upon request, OPTIKON 2000 SpA provides wiring diagrams, parts lists,
descriptions, calibration instructions or other information to support the operator’s
qualified personnel in case of repair of the serviceable elements of the unit.

Summary of Contents for 161601































































































Search results

Summary of Contents for 161601

Reviews:

Related manuals for 161601

Brands by name

Popular brands

OPTIKON 161601, Manual For Installation And Use

Search results

Summary of Contents for 161601

Reviews:

Related manuals for 161601

Brands by name

Popular brands