Optex SC-U1, Operation Manual

Page: 66 / 92

66
Maintenance
Setting
8
Maintenance Setting
Maintenance
Press .
The sensor selection display is displayed.
Select a sensor to set using ,
and press .
By selecting [ALL], all of the installed sensors
can be selected.
The maintenance menu is displayed.
Available display items depend on a sensor.
Selecting [ALL] displays [HOLD] only.
1
2
Item Description Refer to
HOLD/HOLD
CANCEL
The last measurement value is retained (held). This is
used for sensor maintenance and cleaning.
P.67
HOLD Timer Set the time period to hold the measurement value. P.69
Maintenance
Timer
Set a maintenance cycle.
Notification can be done using a relay output when the set
cycle has elapsed ("Maintenance output setting" P.46).
P.70
Sens. Cap
Replacement
Set a replacement cycle for the sensor cap.
Notification can be done using a relay output when the set
cycle has elapsed.
Sensor's
instruction
manual
Set the sensor maintenance settings.
0DLQWHQDQFH
6HQVRU6HOHFW
㸯 S+ࠉ6(S+'
㸰 7XUE7&'
㸱 '2'26
㸲
ࠉ $//
Output
item
Sensor
model
Sensor channel
0DLQWHQDQFH
㸱 '2'26
+2/'
+2/'7LPHUࠉࠉPLQ
0DLQWHQDQFH7LPHUGD\V
6HQV&DS5HSODFHPHQWGD\V
0DLQWHQDQFH
$//
+2/'
Caution
Pressing automatically retains the measurement value.