Optex SC-U1, Operation Manual

Page: 34 / 92

34
4-20 mA Setting
On the channel selection display, switch
between pages using
, select a
channel to set using , and press .
Select a digit by and value by
, and press .
The display returns to the setting item selection menu.
3
P$6HWWLQJ
&+
2XWSXW,WHP6HOHFW
㸱 '2'26
/RZ/LPLW6HWWLQJ
P$ PJ/
+LJK/LPLW6HWWLQJ
P$ PJ/
!
Select [High Limit Setting] using ,
and press .
The current setting value is displayed.
2
P$6HWWLQJ
&KDQQHO6HOHFW
2XWSXW,WHPP$P$
&+
㸯 S+S+
&+㸱'2PJ/
&+ 㸱 7HPSΥ
&+ 㸰 7XUE)78
!
Output item
Sensor channel
P$6HWWLQJ
&+ 㸱 '2'26
+LJK/LPLW6HWWLQJ
P$
ࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉPJ/
u
Signal output range upper limit
For the item selected in the "Output Item Select", set the measurement value to output at
upper limit (Hi, 20 mA).
The setting item selection menu is displayed and the
current setting of the selected channel is displayed.
1
When a value outside the set range is entered, a short
beep sounds. The setting range varies depending on
the measurement item. Refer to the instruction manual
of each sensor.
Press
simultaneously while entering a value
to reset to the factory default setting.
By pressing or , the value returns to the one
before changing it.