25
Sensor Setting
u
Response Time
Set a signal output response time.
A measurement value is calculated using moving average of the time period configured by
the signal output response time. For example, if the sensor measures values every 5 seconds
and the signal output response time is set to 50 seconds, which is 5 seconds
×
10 times, the
moving average of 10 times measurement is calculated and used as the measurement value.
The setting range is shown below.
Shown below is an example of configuring 10 seconds as the signal response time.
The current setting value is displayed.
The setting is complete and the display returns to the sensor setting menu.
In this example, "10" is typed in to set as 10 seconds.
When a value outside the set range is entered, a short beep sounds.
Press
simultaneously while entering a value to reset to the factory default
setting.
By pressing
or
, the value returns to the one before changing it.
Select [Response Time] using
,
and press
.
Press
.
Select a digit by
and value by
, and type in a value.
1
2
4
3
6HQVRU6HWWLQJ
6HQVRU6HOHFW
㸯
S+6(S+'
㸰
7XUE7&'
㸱
'2'26
㸲
Measurement
item
Sensor
model
Sensor channel
6HQVRU6HWWLQJ
㸱
'2'26
'LVSOD\,WHP
5HVSRQVH7LPHVHF
6HQVRU6HWWLQJ
㸱
'2'26
5HVSRQVH7LPH
ࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉ6HF
Setting range
Factory default setting
Response
Time
5 to 600 seconds (by 5 seconds)
5 seconds
The sensor setting menu is displayed.
On the sensor selection display, select a
sensor to set using
, and press
.
