69
Maintenance
Setting
u
Hold Timer
On the sensor selection display, select a
sensor to set using
, and press
.
Hold timer setting must be set for each sensor.
If [ALL] is selected, the setting is not available.
Select [HOLD Timer] using
, and
press
.
1
2
0DLQWHQDQFH
6HQVRU6HOHFW
㸯
S+ࠉ6(S+'
㸰
7XUE7&'
㸱
'2'26
㸲
ࠉ
$//
Output
item
Sensor
model
Sensor channel
0DLQWHQDQFH
㸱
'2'26
+2/'
+2/'7LPHUࠉࠉPLQ
0DLQWHQDQFH7LPHUGD\V
6HQV&DS5HSODFHPHQWGD\V
Select a digit by
and value by
, and press
.
The display returns to the maintenance menu.
3
0DLQWHQDQFH
㸱
'2'26
+2/'7LPHU6HWWLQJ
ࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉPLQ
0DLQWHQDQFH
㸱
'2'26
+2/'7LPHU6HWWLQJ
2))
Set the time period to hold the measurement value.
The setting range is shown below.
Output Item
Setting range
Factory default setting
HOLD Timer OFF
10 to 1440 minutes (by 10 minutes)
60 minutes
When a value outside the set range is entered, a short beep sounds.
Press
simultaneously while entering a value to reset to the factory default
setting.
By pressing
or
, the value returns to the one before changing it.
• When [OFF] is set, press
to display the hold
timer input display.
• When the value is 10, press
to select [OFF].
