9
To acquire proper measurement values
Do not install in places exposed to
direct sunlight or poorly ventilated
areas.
Use the included transmitter
mounting bracket for installation.
Use the supplied cable gland for the
Transmitter. When connecting piping
directly to the Transmitter, take
measures to prevent corrosive gas
such as chlorine gas from entering
the Transmitter through piping.
Do not bind the signal output cable
and the power cable together or
place them in the same cable gland.
Do not touch electrical parts or the
board.
Remove the protective film from the
display before use.
Do not apply strong shock or
excessive force to the Transmitter.
To clean the Transmitter,
gently wipe it with
a clean, soft cloth
containing diluted
neutral detergent, and
then wipe off moisture
with a dry clean soft
cloth. Do not wipe with
an organic solvent. It
may cause failure.
Organic
solvent
Paint
thinner
It may cause failure.
Unit only suitable installed in control panel.
